HYDRAM PUMP (WATER PUMP WITHOUT MECHANICAL ENERGY DRIVE)

Authors

  • Irwan Anwar , Universitas Islam Riau
  • Dedi Wardianto , Institut Teknologi Padang
  • Afdal Afdal , Universitas Eka Sakti Padang

DOI:

https://doi.org/10.21063/jtv.2023.1.1.81-85

Keywords:

Hydram pump, elevation, debit, vertical fall (H1), vertical elevation (H2), potensial energy (PE = mgh), kinetic energy (KE = ½ mv2), efficiency

Abstract

Hydram pump is the machine that conversion potential energy (PE = mgh) of water to kinetic energy (KE = ½ mv2) in intake pipe become water hammer in casing of hydram pump. That has capability to raised water from the pump with vertical elevation H2 = + 50 m to 500 m. It needs the minimal elevation + 1 m, the minimal debit 7 litres/minute and it depends on diameter and pump type. The principal of its construction has length of intake pipe L = 5 to 10 x H1 (vertical fall).

Downloads

Download data is not yet available.

Downloads

Published

2023-01-25

Issue

Vol. 1 No. 1 (2023): Journal of Technology and Vocational

Section

Article

License

Copyright (c) 2023 ITP Press

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

How to Cite

HYDRAM PUMP (WATER PUMP WITHOUT MECHANICAL ENERGY DRIVE). (2023). Journal of Technology and Vocational Studies, 1(1), 81-85. https://doi.org/10.21063/jtv.2023.1.1.81-85

Most read articles by the same author(s)

1 2 > >>